copper refrigeration connectors
DME copper refrigeration connectors feature an effective solution for your high pressure needs. These joints are effective in lateral displacement applications. Each connector is tested prior to leaving the factory to ensure you receive the highest quality product.
DME Model DM7407 Vibration Absorbers were designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor-induced vibration to the piping. For optimum absorption of the vibration, the DME vibracheck flex connector should be anchored as close to the downstream side of the vibration absorber as possible. These High quality Flex connectors can also be used for other copper tube systems to isolate vibration and compensate for tube misalignment. Please consult DME for any special length requirements.
SIXTEEN MODELS AVAILABLE TO FIT COPPER TUBING FROM 1/4″ TO 4-1/8″.
U.L. AND C.S.A APPROVED SUCTION SIDE ONLY
EACH ASSEMBLY IS INDIVIDUALLY PRESSURE TESTED, CLEANED AND SEALED IN PLASTIC FILM.